Shanghai Sales Centre:
Address: room 2406, greenbelt and Chuang building, 450 Cao Yang Road, Putuo District, Shanghai.
Mailbox: sales@jeffelcn.com
Tel: 021-62586212 0573-88222777
Fax: 021-62586271 0573-88222622
Website: m.seeleylakefloral.com/en
After using the ultrafiltration membrane, it is hoped that its basic performance will be greatly improved, including some of its basic properties. Here, it is necessary to pay special attention to and understand its corrosion resistance. This condition can guarantee the use during use. Will not be disturbed by other conditions.
Because there are impurities in the filter pool, and these impurities will be fermented together for a long time to produce some special substances, and there will be some corrosive substances inside, which have been considered when making ultrafiltration membranes. This problem, and then it is reasonable to create a corrosion-resistant film, the effect is very good.
Ultrafiltration membrane manufacturers have such ultrafiltration membranes, which can improve the overall filtration effect and increase the use time. These are good aspects, which guarantees the long life of the ultrafiltration membrane and the ability to Go to the next step.
advantage:
1. Ultrafiltration membrane components are made by world-renowned membrane companies, ensuring that customers receive quality organic membrane components to ensure retention and membrane flux.
2. The system has high recovery rate and the obtained products are of good quality, which can achieve high-efficiency separation, purification and high-concentration of materials.
3, the process has no phase change, no adverse effects on the composition of the material, and the separation, purification, concentration process is always in the normal temperature state, especially suitable for the treatment of heat sensitive substances, completely avoiding the destruction of biological active substances by high temperature Disadvantages, effectively retain the biological active substances and nutrients in the original material system.
4. The system has low energy consumption and short production cycle. Compared with traditional process equipment, the equipment has low operating cost, which can effectively reduce production costs and improve economic benefits.
5, the system process design is advanced, the degree of integration is high, the structure is compact, the floor space is small, the operation and maintenance are simple, and the labor intensity of the workers is low.
6. The system is made of hygienic stainless steel, fully enclosed pipeline operation, clean and on site, meeting the requirements of GMP or FDA production regulations.
7. The control system can be personalized according to the user's specific requirements. Combined with Shijia's advanced control software, the on-line online centralized monitoring of important process operating parameters avoids manual misoperation and ensures long-term stable operation of the system in multiple directions.
WeChat 2D code
Shanghai Sales Center: | |
Address:Room 2111, Greenland and Chuang Building, No. 450 Caoyang Road, Putuo District, Shanghai | |
Email: sales@jeffelcn.com | |
Tel: 021-62586212 | |
Fax: 021-62586271 |
Zhejiang production base: | |
Add: No. 370, Century Avenue, Development Zone, Chongfu Town, Tongxiang, Zhejiang, China | |
Email: sales@jeffelcn.com | |
Tel: 0573-88222777 | |
Fax: 0573-88222622 |